The introduction of Beamlink VT02+VR02 EN
BeamLink-VT02 User Manual
QUESTIONS & ANSWERS
No sound during transmission.
Answer: Please check to see if the audio mode set by the transmitter is an external audio mode. If it is external audio mode, long press the MODE key for 3 seconds and release it to switch back to embedded audio mode.
No image output when the transmitter and receiver are powered up.
Answer: First, check whether there are any problems with the power circuits of the transmitter and receiver; second, confirm whether the format of the connected equipment matches; third, whether the set resolution matches each other; fourth, adjust the height of the transmitter and receiver to be more than 2 meters respectively.
What format is the video stream coming out of the LNA port? Is it possible to change codes?
Answer: The output from the LNA interface is an IP video stream, which is decoded by a computer or a switch console.
Problems of mosaics or cardon
Answer：The transmitter and receiver should be set up in a high position, 1.5-2 meters or more; the antennas should be fan-shaped and forward facing for the best transmission effect; the LNA mode should be set in L (low gain mode) when multiple transmitters work at the same time, please ensure that the distance between the transmitters is at least 1 meter or more; if there is still mosaic or cardon, please switch the channel to medium channel.