The introduction of Beamlink VT02+VR02 EN

BeamLink-VT02 User Manual


Your content goes here. Edit or remove this text inline or in the module Content settings. You can also style every aspect of this content in the module Design settings and even apply custom CSS to this text in the module Advanced settings.
No sound during transmission.

Answer: Please check to see if the audio mode set by the transmitter is an external audio mode. If it is external audio mode, long press the MODE key for 3 seconds and release it to switch back to embedded audio mode.

No image output when the transmitter and receiver are powered up.

Answer: First, check whether there are any problems with the power circuits of the transmitter and receiver; second, confirm whether the format of the connected equipment matches; third, whether the set resolution matches each other; fourth, adjust the height of the transmitter and receiver to be more than 2 meters respectively.

What format is the video stream coming out of the LNA port? Is it possible to change codes?

Answer: The output from the LNA interface is an IP video stream, which is decoded by a computer or a switch console.

Problems of mosaics or cardon

Answer:The transmitter and receiver should be set up in a high position, 1.5-2 meters or more; the antennas should be fan-shaped and forward facing for the best transmission effect; the LNA mode should be set in L (low gain mode) when multiple transmitters work at the same time, please ensure that the distance between the transmitters is at least 1 meter or more; if there is still mosaic or cardon, please switch the channel to medium channel.